KB Articles

loop()

setup() function එක අදාල දේවල් සදා ගැනීමෙන් පස්සේ. අපි loop() function එක ප්‍රෝග්‍රෑම් කරන්න ඕන මේකෙදි අපි Arduino board එකට ලබාගන්න Input, Output සහ changes ඇතුලත් කරනවා. මේකට ඇතුලත් කරන ප්‍රෝග්‍රෑම් එක Arduino board එක on එකේ තියෙන තාක් එක දිගට [...]


Posted By Comments: 0Post Date: 2017-10-26

setup()

setup() function එක භාවිත කරලා තමයි අපි අපේ ප්‍රෝග්‍රෑම් එක පටන් ගන්නේ. මේ තුළ අපි variables, pin modes සහ භාවිතා කරන libraries වල යෙදුම් ඇතුලත් කරනවා. ඒ වගේම මේ  Arduino board power on සහ reset කරාම මේ  function run වෙන්නේ එක [...]


Posted By Comments: 4Post Date: 2017-10-25

[Project 8] – Temperature Control With NTC Using 5 LED

In this project we will make [Project 8] – Temperature Control With NTC Using 5 LED. ( NTC : Negative Temperature Coefficient ) I will use arduino uno in the circuit design program. I use usually arduino mega 2560.  You can [...]


Posted By Comments: 0Post Date: 2017-10-25

[Project 7] – RGB LED Control With Button

In this project we will make RGB LED Control With Button. To understand this project  you should know working prencible RGB (RGB: Red Green Blue; LED: Light Emitting Diode ) I will use arduino uno in the circuit design program. [...]


Posted By Comments: 0Post Date: 2017-10-23

[Project 6] – RGB LED Control With Arduino

In this project we will make RGB LED Control With Arduino. To understand this project  you should know working prencible RGB (RGB: Red Green Blue; LED: Light Emitting Diode ) I will use arduino uno in the circuit design [...]


Posted By Comments: 0Post Date: 2017-10-22

[Project 5] – LDR එකක් භාවිතා කර night light එකක් හදමු.

In this project we will make make an arduino controlled night light using LED and LDR. To understand this project  you should know working prencible LDR (LDR: Lighth Dependent Resistor; LED: Light Emitting Diode ) I will use arduino [...]


Posted By Comments: 0Post Date: 2017-10-22

[Project 4] – LED 8 භාවිතයෙන් Arduino Knight Rider

In this project we will make knight rider with 8 LED. I will use arduino uno in the circuit design program.I use usually arduino mega 2560.  You can use the other arduino cards. This project for beginners. Schema: Materials: Arduino UNO / Other [...]


Posted By Comments: 0Post Date: 2017-10-21

[Project 3] – Button එකක් භාවිතයෙන් LED Control කරමු

In this project we will make LED control with button. I will use arduino mega 2560. You can use the other arduino cards. This project for beginners. Schema: Materials: Arduino Mega 2560 / Other Arduino Cards  x 1 Breadboard    x 1 220 ohm resistor [...]


Posted By Comments: 1Post Date: 2017-10-21

Arduino ඉගනගන්න ආරම්භ කරමු.

Getting Started with Arduino 1) Firstly we need a arduino compiler(IDE); run to download arduino compiler: http://arduino.cc/en/Main/Software 2) To run this software, your computer should have one of the following operating systems installed: 3) after the installation has completed run the arduino compiler: your Arduino IDE [...]


Posted By Comments: 0Post Date: 2017-10-21

[Project 2] – LED භාවිතා කර Traffic Lights එකක් හදමු.

In this project we will make an example of traffic lights. I will use arduino mega 2560. You can use the other arduino cards. This project for beginners. Materials: Arduino Mega 2560 / Other Arduino Cards   x 1 Breadboard    x 1 220 ohm [...]


Posted By Comments: 0Post Date: 2017-10-21